All Trades
⚡ Ontario Electrician System

The Operating System for Ontario Electricians

From panel upgrades to EV charger installs — manage every job, crew member, material, and ESA requirement in one place. Built for master electricians, journeypersons, and apprentices.

$95/hr
Standard Labour Rate
$190/hr
Emergency Rate
Yes — Tracked
Licence Required
9/10
Mobile Intensity
The Reality Without a System

Sound Like Your Current Week?

This is what running a trade business looks like when every piece of information lives in a different place.

😤

"Receipts in the cup holder"

Supplier receipts from Rexel or ESC get stuffed in the truck dash and invoiced 3 weeks later — if at all. That's real money left on the table.

😤

"QuickBooks knows nothing about your jobs"

Accounting disconnected from actual job records means you're spending Sunday nights trying to reconcile what you did two weeks ago.

😤

"ESA dates on a sticky note"

The permit number and inspection date are written on a sticky note on the dash. One coffee spill and it's gone.

😤

"Apprentice tracked on a whiteboard"

Hours, job assignments, and ratio compliance tracked on a whiteboard or group text. Not audit-proof. Not scalable.

😤

"Van stock counted by opening the doors"

You don't know if the 100A breakers are on Van 1 or Van 2 until someone drives to the site and checks.

😤

"Six group texts running at once"

Three jobs, two apprentices, one supplier, and a customer change request — all in separate text threads. No record, no accountability.

What TradeForge Changes

Here's What Changes

Not a productivity tip. Not a new app to add to the pile. One system that connects everything.

Before TradeForge
ESA dates on sticky notes
Apprentice ratios on whiteboards
Supplier receipts in the truck dash
QuickBooks disconnected from jobs
Van stock unknown until you look
6 text threads for 3 jobs
After TradeForge
ESA & permit records per job
Apprentice ratios tracked automatically
Materials logged and invoiced
Accounting connected to job records
Van stock visible from any phone
One system, nothing forgotten
We Get It

Electricians don't just need invoicing. They need ESA licence tracking, inspection records, van stock management, apprentice-to-master role assignments, and the ability to quote a panel upgrade with real material costs from the truck — without digging through spreadsheets or texting the office.

Pain Points We Solve

Sound Familiar?

ESA & Inspection Paperwork

Tracking inspection dates, permit numbers, and compliance documentation manually means things fall through the cracks.

Messy Quotes From the Truck

Quoting panel upgrades, service calls, or EV charger installs without a proper system leads to underquoting and missed materials.

Van Stock & Tool Tracking

Not knowing which van has the breakers, tools, or wire you need before driving 40 minutes to a job site.

Apprentice Scheduling

Managing apprentice hours, assignments, and progress records across multiple job sites without a central system.

Material Costs Eating Profit

Forgetting to invoice for materials, conduit, wire, and fittings used on a job reduces margin on every ticket.

Disconnected Job Notes

Service history, customer notes, and job photos scattered across texts, emails, and paper work orders.

Built for Your Trade

What This System Manages

ESA Licence Tracking
Panel Upgrades
EV Charger Installs
Service Call Dispatch
Material & Wire Inventory
Van Stock Lists
Apprentice Hour Logs
Inspection Documentation
Permit Records
Quotes & Invoicing
HST Tracking
Crew Scheduling
Supplier Accounts
Test Equipment
Customer History
Emergency Calls
A Real Day in the Field

What Your Day Looks Like With This System

This is an actual electrician day — from first dispatch to final invoice — running through TradeForge.

6:00 AM

Schedule reviewed on phone — all 4 jobs visible with addresses and crew

Scheduling
7:15 AM

Van stock confirmed for panel upgrade — 200A breakers, wire, conduit all accounted for

Van Stock
9:30 AM

Panel photos uploaded from site, ESA permit number logged directly on the job

Compliance
11:00 AM

Apprentice hours logged on site — ratio check passes automatically

HR
1:45 PM

Customer asks about adding 2 circuits — quote sent from the truck in under 5 minutes

Quoting
4:10 PM

Invoice sent with all materials, labour, and HST before leaving the driveway

Invoicing
5:00 PM

Supplier run logged — materials automatically added to job cost

Materials

Every entry above is one real touch-point that used to require a separate system, a text message, or a piece of paper.

Daily Workflow

From First Call to Paid Invoice

01
STEP 01

Lead Captured

Customer inquiry auto-fills job details. Service type, location, urgency.

02
STEP 02

Quote Built

Select services, add materials at cost, apply labour rate. HST calculated. Sent in minutes.

03
STEP 03

Materials Pulled

Van stock checked. Material list generated. Supplier run logged if needed.

04
STEP 04

Job Dispatched

Tech assigned. Route set. Work order on their phone before they leave.

05
STEP 05

Inspection Notes Filed

Permit numbers, ESA reference numbers, photos — logged on site from the phone.

06
STEP 06

Invoice Sent

Auto-generated invoice with all labour, materials, and HST. Sent before leaving the driveway.

Built for Your Specific Trade

Why Generic Software Fails Electricians

A generic CRM built for plumbers won't understand electrician workflows. It doesn't know your terminology, your compliance requirements, or the realities of your daily operations. TradeForge was built specifically for the way you work.

What This System Knows About Your Trade

🔌

Breakers tracked by van

Know which truck carries which breaker sizes before dispatch. No more 40-minute drives for parts you already have.

📋

ESA permits expire — we remind you

Automated alerts before permit and licence expiry. No more finding out on a job site.

👷

Apprentice ratios are law

Journeyperson-to-apprentice ratios tracked automatically. Stay compliant without counting heads every week.

📸

Panel photos attached to jobs

Before and after photos organized by job number, not scattered across 3 phones and a text thread.

🚐

EV charger load calculations documented

EV charger installs require specific documentation. Built into the job record, not on a separate clipboard.

🧾

Supplier runs become billable materials

Every Rexel or ESC run logged means every fitting, wire nut, and staple gets invoiced.

Why Generic CRMs Don't Cut It

✕ Generic scheduling apps don't understand trade-specific dispatch.

Electrician dispatch has rules generic tools don't know — van stock, licence type, job site requirements, and urgency levels that mean different things than a standard service call.

✕ Generic invoicing doesn't track trade-specific materials.

HST-included material markup, supplier-specific cost tracking, and per-job material reconciliation are not features in consumer invoicing apps.

✕ Generic CRMs don't know your compliance obligations.

Licence expiry alerts, WSIB tracking, WSIB clearance certificates, and industry-specific safety forms are not features in Salesforce or HubSpot.

✕ Generic task managers don't understand trade phases.

There's a difference between 'rough-in complete' and 'final trim ready.' Generic tools don't know that. Your platform should.

TradeForge is built for the electrician trade specifically — not adapted from a generic platform and called "trade-ready."

Real Talk

You Didn't Get Into the Electrician Trade
To Manage Eight Systems.

You got into it because you're good at the work. The wiring, the pipes, the finish — that's the job. But somewhere along the way, the admin became a second full-time job that nobody hired you to do.

🌙

Invoicing at 10pm because there was no time during the day

📂

Receipts in a shoebox, sorted every March for your accountant

📱

6 apps to run the business you started with your hands

💬

Chasing payments with text messages because you forgot to follow up

🗒️

Quotes written on paper that never became invoices

🧠

Crew schedule, material list, and supplier contacts all in your head

📉

Forgetting to charge for half the materials because they weren't logged

😤

Customers asking about invoices from 3 weeks ago that you haven't sent

TradeForge centralizes everything.
So you can focus on the actual work.

One system for jobs, crew, materials, invoicing, compliance, and customers. Not six apps duct-taped together. Not a spreadsheet that someone built in 2019 that nobody understands anymore. One system. Built for electricians.

Replace the Patchwork

One System Instead of Seven

Most Ontario contractors are paying for multiple disconnected tools and still using spreadsheets and paper to fill the gaps. The estimated monthly cost adds up fast.

Typical Contractor Stack$250-$900+/month*
QuickBooks / Accounting
$50–$100/mo
Scheduling App
$30–$80/mo
Estimating App
$40–$120/mo
Invoice & Payment App
$25–$60/mo
Payroll Software
$40–$100/mo
Spreadsheet for Tools
Free (but your time isn't)
Spreadsheet for Vehicles
Free (but your time isn't)
Paper Safety Forms
Free (but they get lost)
Phone Calendar for Reminders
Free (but unreliable)
Supplier Notes in Your Head
Priceless (until you forget)
Folders of Receipts
Free (until tax time)
*Typical estimated cost. Actual spend depends on business size and tools chosen.
TradeForge All-in-OneOne unified system
Customers & Job History
Quotes & Estimates
Job Scheduling & Dispatch
Invoicing & Payments
Expenses & Materials
HST Tracking
Payroll & Crew Records
Tools & Van Stock
Vehicles & Fleet
Suppliers & Accounts
Compliance & Licences
Safety Forms & WSIB
Before/After Photos
Change Orders
Reporting & Analytics
Mobile Field App
Less duplication. Less forgotten admin. Less disconnected data.
Compliance and Renewals

Stay Legal. Always.

ESA/ECRA Licence

Expiry alerts and renewal tracking for all licence classes.

Inspection Records

Log permit numbers, inspection dates, and outcomes per job.

Apprentice Ratios

Track journeyperson-to-apprentice ratios for compliance.

WSIB Clearance

Upload and track WSIB certificates for every crew member.

Mobile-First Field Use

Built for the Truck, the Site, and the Ladder

Contractors check this on their phone from job sites, parking lots, and supply houses. Large buttons. Offline-ready. Glove-friendly controls. One-handed operation.

Quote from the truck before driving to the next job
Log parts used on-site before you forget
Take before/after photos directly in the job record
Send invoices before leaving the customer's driveway
Check van stock and crew availability in seconds
ELECTRICIAN FIELD VIEW
Today's Jobs4 Active
Next Job2.3 km away
Van StockChecked
Open QuoteAwaiting Approval
ComplianceAll Clear
Mobile intensity: 9/10 for this trade
⚡ Ready to Get Organized?

See How It Works for Electricians

Book a walkthrough with a real person who understands the electrician trade. No generic demo. No sales pitch disguised as a tutorial.

TradeForge

The operating system for Ontario's skilled trades industry. Built by contractors, for contractors.

Company

AboutContactPrivacy PolicyTerms of Service
© 2026 TradeForge™. All rights reserved. Ontario, Canada.
ESA Compliant·TSSA Ready·WSIB Tracking